How to configure tplink router

how to configure tplink router

How do I configure Remote Management for my TP-Link Wireless Router?

Step 1 Open the web browser and type the IP address of the device in the address bar (default is ). Press Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK Step 3 Click on Wireless->Basic on the left side and. How to Set Up a TP-Link Router 1 Connect Power. Please ensure that you are using the power adapter that came with your router. Locate the power cable 2 Connect to Modem by Cable/Wire. Your router must be connected to a modem in order to provide the local network with an 3 Log In. Using a.

Step 1 Connect your device to a Wi-Fi router. Method 1: Connect via an ethernet cable for PC only. Go to the Wi-Fi settings of your PC or smart device. Select the SSID and then enter the corresponding password to join the network. Method 3: Connect via QR code for smart device only. Find the QR code printed on the label of the router. Scan it with your phone or tablet to join the preset 2. Wireless devices that support How often to wash thick hair, including Android phones, tablets, and laptops, can connect to your router through this method.

WPS is not supported by iOS devices. And, the WPS function cannot be configured when the wireless function of the router is disabled.

Please make sure the wireless function is enabled and is configured with the appropriate configurs before configuring the WPS. Note: If you are not familiar with some parameters, please keep the default settings or consider reviewing the user guide of your product model. If the login window does not appear, please refer to the Why fail to access tplinkwifi.

If you have registered a TP-Link ID roiter bound your cloud router to it, the login password you created here will be invalid. Advanced: remotely manage your router via Tether app. But what if you want to check network status or change settings when you are not at home? TP-Link Tether provides the easiest way to remotely access and manage network devices through your iOS or Android devices.

Besides, more personal route for your network can be configured with TP-Link Tether. Note: If you want to remotely manage the router via a web browser, refer to How to set up Remote Management on the Wi-Fi Routers for detailed configuration. Home Network Community. Log In Register. Report Inappropriate Content. Within two minutes, press the WPS button on your router.

Note: If the login window does not appear, please refer to the Why fail to access tplinkwifi. Advanced: remotely manage your router via Tether app But what oruter you want to check network status or change settings when you are not at home? Download the Tether app. Tap the button in the Tether app and select your model. Follow subsequent instructions to set up your router. Bind your router. Cancel Notify Moderator. Follow Us. All rights reserved.

We're here to help!

Step 2: Type in your TP-Link Cloud Credentials and tap “Log In”. *Note: Click here if you do not have a TP-Link Cloud account. Step 3: Tap on “Bind to xxxx”. Step 4: You should see a “Success!” message at the bottom of the screen. Once this process is complete, you will have cloud/remote access to your router via the Tether App. Enable the WPS feature on your device’s Wi-Fi settings by tapping a WPS icon or select a WPS Connection option. Within two minutes, press the WPS button on your router. Step 2 Log in to your router’s web management page Open a browser and visit lovealldat.com to log in to the router.

Need to configure your TP-Link Wireless router? Here is a step-by-step guide on how you can configure your device. Furthermore, it can make it more difficult for other people to access and modify configuration settings of your router. TP-Link wireless routers are easy and fast to configure and manage when you do it via its web-based management page. Once you have successfully logged in to the management page, you can easily configure and manage your TP-Link wireless router. You will find the detailed explanation and other instruction for every page at the right portion of the management page.

Take note that everything is read-only. Clicking on the Network menu will allow configuration and customization of the local network manually. It changes the default settings of the router. The Wireless configuration will open up functionality and performance improvement of the wireless network.

It can also be used to configure some of the necessary parameters of the TP-Link router. Each of their detailed explanation will be shown at the right corner of the management page.

In the System Tools menu, you will be able to configure various settings from Time settings, diagnostic, Firmware upgrade, Factory defaults, Backup and Restore, Reboot, system Log, Statistics, and others. Note : It is recommended to change the default username and password for additional security.

To do this, open the Password submenu under the System Tools menu on the navigation bar. It will open up a window where you need to type in your old or default username and password as well as your new username and password.

Once done, you will be logged out automatically and will be prompted to sign in using your new account credentials. Sign in using your new username and password. All of these are located at the navigation bar at the left part of the management page. Amazon Affiliate Disclosure Notice: It is important to also note that Topprobe is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for website owners to earn advertising fees by advertising and linking to amazon.

The information contained in topprobe. The information is provided by topprobe. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of topprobe.

Through topprobe. We have no control over the nature, content, and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.

Every effort is made to keep topprobe. Connect a TP-Link router to a modem using an Ethernet cable. Then, connect to the default wireless network of the TP-Link router. Log in using the default settings credentials. Note: If the login window does not prompt, it simply indicates that your web browser was set to proxy. Once logged in, a window will pop-up labeled as Quick Setup Wizard.

Click on the Next button to get the process started. Note: Computers near your router will be able to view your SSID so avoid using any personal information including the type of router you are using. Note: Use a strong password, something that is difficult for others to guess. Once done, click the Next button. Click the Finish button. You will then be prompted to sign in via your new SSID and password. Closer Look at the Management Page for Configuration TP-Link wireless routers are easy and fast to configure and manage when you do it via its web-based management page.

You can launch it on any Windows or other OS as long as it has a web browser. Each of these main menus will open up its corresponding submenus after a single click. Network Configuration Clicking on the Network menu will allow configuration and customization of the local network manually.

Wireless Configuration The Wireless configuration will open up functionality and performance improvement of the wireless network. Confirm your new password. Click on the Save button to finish. Amazon Affiliate. Latest Post. Enable registration in settings - general.

Comments:

There are no comments on this entry....